Product DescriptionVehicle Specific Adventure MotoStuff Bar Shown Is Sold Separately. Customer Write-up:
"I’m sure there is are lower cost ways to fabricate a bracket to mount these lights on but I decided to modify the light bracket from Adventure MotoStuff. This bracket is made from aluminum and was easy to work with. I cut and ground the side bars flush with the support bars then cut to shortened the support bars by 1 ½” and predrilled the holes for the support fasteners supplied with this bracket. I also wanted to mount the light as close to the bottom of the fairing as possible so I notched a couple of notches on the back side of the cross bar to accept the light bracket when mounted on top of the bar instead of the bottom of the bar. See the following photo for the completed light assembly.
From this point all I needed to do was mount the light assembly to the bike using the supplied fasteners provided with the Adventure MotoStuff light bar. I did add plugs to the wiring from the lights going to the power wires and zip tied them inside the front of the fairing so I can unplug and remove the light assembly when I need to get the fairing off for service. The following are a few pictures of the completed light bar assembled and on the bike.
All in all I am pleased with the outcome. The lights provide as much visibility to others as the fork mounted driving lights in my opinion and provide a nice wide flat beam for fog, rain and at night is a supplement to the low beams and I don’t seem to blind oncoming traffic. I know the looks are not for everyone but the function is my main concern and if nothing else it adds to the what the heck is that factor."
Factory V-Strom driving lamps cost upwards of $300 + Installation. Hella driving lamps install within the factory driving lamp spots, outperform the factory driving lamps and cost less guaranteed. Your favorite ride never looked so good.
More Than Improved Visibility
This listing includes a complete driving lamp kit for use on the model shown above without the factory driving lamps or as a replacement for existing factory driving lamps. This listing includes everything needed to install and requires no other parts or extensive modification. Hella offers the performance and brightness of Xenon H.I.D. bulbs and have photometrically designed hardened glass lenses that pierce through the darkness in any weather condition.
The Light of Choice
Glass lenses die-cast metal housings measuring 2.4" High x 3.25" Width x 3" Diameter, adjustable mounting brackets, illuminated factory-style style push button switch, deluxe wiring kit with relay and fuse, install directions and more all included.
Lamp Kit Specs:
- (2) SAE Approved Hella Rectangular Lamps
- Aluminum Metal Housings & Mounting Hardware
- (2) 4100K H3 - 55 Watt Xenon Halogen Hella Bulbs
- Photometrically Designed Hardened Glass Lenses
- Lamps Use; Easily Replaceable, Common Size, Low Cost Bulbs
- Mini LED Illuminated Factory Style Push Button Switch
- Complete Harness With Relay & Fuse
- Photo Installation Directions & Lifetime No-Fault Warranty
- Satisfaction Guaranteed or Your Money Back
This listing includes a complete driving lamp kit for use on the model listed on both sides without the factory driving lamps or as a replacement for existing factory driving lamps. This listing includes everything needed to install and requires no other parts or extensive modification even if you don't already have the optional factory fog lamps.
Receive a FREE Gift with Your Order Free While Supplies Last.
Take the BlingLights Challenge® and try any BlingLights product no-risk. Then Decide. If you don't love it, you don't keep it. ® No obligations, simply send it back, no questions asked - you keep the free gift.
Frequently Asked Questions:
Are these driving lights original equipment manufactured? No, these driving lights are manufactured by Hella. Many of our customers are able to install this driving light kit in a period of approximately 45 minutes to 2 hours. More involved installations may require drilling to position the lights where you want them. This kit includes mounting brackets that mount independently of the factory mounting points. If you have plastic inserts currently covering your driving light holes then you will have to remove those to install this kit, which is required of any driving light kit installation. The end result will be a clean look if done with care. For those uncomfortable with the install, have the kit professionally installed at a local car stereo shop.
Will this kit fit my vehicle listed in the page title? We have conducted extensive research and have sold hundreds of kits to customers with your same vehicle, with no fitment issues. Lamps are intended for installation within the factory driving lamp openings for vehicles without optional driving lights or as a direct upgrade replacement for the factory driving lights. The lights are meant to mount behind the factory pre-cut driving light holes from the inside of the bumper and kit includes everything needed to install for vehicles with or without factory driving lights.
Does the kit include everything I need? Yes, the kit includes 2 lamp enclosures for left and right side, powerful 4100K H3-55 watt bulbs, adjustable mounting hardware, complete wiring kit with relay and fuse, switch, photo installation directions, free phone and email support and lifetime no-fault warranty.
Can I hook the lights up to my factory light switch instead of the included switch? Of course, just run the wire to the factory switch instead of the included switch. The included switch can also be substituted with other switches available through BlingLights.
What types of bulbs come with this kit? Two powerful, genuine Hella 4100K H3 bulbs with an output of 55 watts a piece, 110 watts total! These bulbs are designed for maximum output and durability. The bulbs generally last many years without the need for replacement. There is a good chance the bulbs will outlast the life of the vehicle. H3 replacement bulbs are a common size bulb and can be purchased through us or anywhere else automotive bulbs are sold.
The lights are great and I use them almost every night. We get a lot of fog in the winter here on the west coast of Florida, and these lights project a perfect beam to cut through. They look great and fit perfectly too. Your product exceeds Suzuki's factory lights by far & at 1/6 the cost. These lights are VERY high quality with a sealed, heavy glass lens and strong housings. Everything else I saw on the market was all plastic. I am going to order another set as a backup for the future. Thanks again.
-Mike of Florida
In the event the item received arrives damaged or wrong item was ordered or shipped contact us and we will resolve immediately. You are entitled to a full refund for any reason if item is mailed back within 60 days of receiving item. Item must be in the exact brand new condition it was received along with the order number and reason for return. Keep the gift just for trying our product even if you decide to return. No RMA or prior authorization required in order to return. We are not responsible for any additional shipping charges which may occur to return products to us.
BlingLights will repair, or at our option, replace this product for life. The NO FAULT provision of this warranty means that regardless of how the item may have been damaged or rendered unusable (fully or partially) by the Owner of the item, BlingLights will repair or replace the item without any questions being asked. To take advantage of this provision, enclose a money order for $25.00 (U.S. dollars) with the item to cover inspection, handling, and return shipping.
Designated trademarks and brands are the property of their respective owners.