Product Description
- I made an L bracket out of 1.5 or 2 in steel, then I welded a T on one end that is about 4 inches wide.- I cable clamped the L bracket to the fairing brace behind the headlight.
- Bolted the BlingLights to the T.
- Had to shorten the mounts of the BlingLights so they would tuck up close to the headlight.
- Had to redrill the mounting bolt in the bracket since I cut the original off.
I wired mine with the relay and included connectors. I mounted the relay to the holder for the rear rack cover and I wired the positive trigger to the bright light wire of the headlight. If my box ever fails I will have to do come creative wiring road side.
Factory driving lamps can cost upwards of $377 + Installation. BlingLights driving lamps outperform the factory driving lamps and guaranteed to cost less. Your favorite ride never looked so good.
More Than Improved Visibility
Experience the future of driving via an astonishing daylight-like visibility thanks to BlingLights BL-527w light technology. Featuring a driving, light-on-road pattern fused with an intense HID simulated white output. The BL-527w xenon halogen lamps can be easily seen in virtually any light including direct sunlight. You can depend on these lights to increase visibility in all conditions.
The Light of Choice
Designed to imitate the appearance of ordinary dealership lamps, BL-527w lamps operate like original driving lamps and can be used with the factory wiring and lamp controls. In addition to increased visibility, BL-527w includes everything needed to install even if you don’t already have driving lamps. BlingLights’ BL-527w driving lamp kit includes full length wiring harness with 30amp relay, 15amp blade fuse and illuminated power button that blends cleanly into any flat surface within reach or out of sight.
BL-527w Lamp Kit Specs:
- (2) 55 Watt 4100K Xenon Halogen Lamps
- Photometrically Designed Hardened Glass Lenses
- Thick Die-Cast Metal Housings & Mounting Hardware
- Heavy-Duty 30 Amp Relay and 15 Amp Blade Fuse
- Complete Wiring Harness With Illuminated Power Button
- Lamps Use; Easily Replaceable, Common Size, Low Cost Bulbs
- Installation Directions & Lifetime No-Fault Warranty
- Satisfaction Guaranteed or Your Money Back
Receive a FREE Gift While Supplies Last
Frequently Asked Questions:
Does the kit include everything I need? The kit includes 2 lamp enclosures for left and right side, powerful H3-55 watt 4100K bulbs, adjustable mounting hardware, complete wiring harness, relay, fuse, power button, installation directions, free phone and email support and lifetime no-fault warranty. Kit does not include bar clamps or vehicle specific brackets.
Can I hook the lights up to my factory light switch instead of the included harness? Of course, just run the wire to the factory switch instead of the included wiring harness.
What types of bulbs come with this kit? Two powerful, genuine BlingLights H3 bulbs with an output of 55 watts a piece, 110 watts total! These bulbs are designed for maximum output and durability. The bulbs generally last many years without the need for replacement. There is a good chance the bulbs will outlast the life of the vehicle. The bulbs are easily replaceable and H3 replacement bulbs are a common size that can be purchased through us or anywhere else automotive bulbs are sold.
Customer Feedback:
The lights are great and I use them almost every night. We get a lot of fog in the winter here on the west coast of Florida, and these lights project a perfect beam to cut through. They look great and fit perfectly too. Your product exceeds Kawasaki’s factory lights by far & at 1/6 the cost. These lights are VERY high quality with a sealed, heavy glass lens and strong metal housings. Everything else I saw on the market was all plastic. I am going to order another set as a backup for the future. Thanks again.
-Mike of Florida
Returns:
In the event the item received arrives damaged or wrong item was ordered or shipped contact us and we will resolve immediately. You are entitled to a full refund for any reason if item is mailed back within 60 days of receiving item. Item must be in the exact brand new condition it was received along with the order number and reason for return. No RMA or prior authorization required in order to return. We are not responsible for any additional shipping charges which may occur to return products to us.
Warranty:
BlingLights will repair, or at our option, replace this product for life. The NO FAULT provision of this warranty means that regardless of how the item may have been damaged or rendered unusable (fully or partially) by the Owner of the item, BlingLights will repair or replace the item without any questions being asked. To take advantage of this provision, enclose a money order for $35.00 (U.S. dollars) with the item to cover inspection, handling, and return shipping.
Legal:
This product was designed for show use only. Laws may vary from state to state so check local laws regarding use of this product while traveling on public roadways. The manufacturer assumes no responsibility for damages, fines or claims resulting from the use of this product. The product was designed for show use only. Design and specification are subject to change without notice.
Designated trademarks and brands are the property of their respective owners.