US Dollars
Canadian Dollar
British Pound
Australian Dollar
Euro
Product Description
Customer Letter:"So I added the fog lights under the jugs where they do not blind motorists and will be most effective in foggy conditions. I experimented with various ways to mount the lamps, wanting them low and out of harm’s way should I drop the bike. At long last I settled on a simple method – I fabricated a mount from aluminum stock readily available at Home Depot, approximately 2.5 x 3 inches, and fastened it to the head guards with two machine screws. Then I attached the lamps to the aluminum mount using two small bolts. You can see above that I made a small bend in the mount so I could aim the lights parallel to the ground (the underside of the jugs are angled down). I attached the mount to the lower center arm of the head guard. I made a small cutout near where the fillister bolt attaches the head guard arm to the head so I could keep the light as far inboard as possible."
Original fog/driving lights can cost upwards of 395.00. BlingLights brand lamps can be installed below the nose as shown, look similar and cost less.
This kit includes a complete combination clear lens version fog/driving lamp kit for use on the model shown above without the auxiliary fog lamps or as a replacement for existing auxiliary lamps. This kit includes everything needed to install and requires no other parts or extensive modification. Rectangle glass lenses, aluminum metal housing 55W H3 halogen bulb (50mm) 2 lamps, heavy-duty mounting brackets, LED illuminated switch, deluxe wiring harness included. Lamps use industry standard bullet connectors found on most aftermarket wiring harnesses.
Light Kit Specs:
- (2) 55Watt H3 Bulbs (easily replaceable)
- Photometrically Designed Hardened Clear Glass Lenses
- Aluminum Metal Housings
- Heavy-duty mounting brackets
- Illuminated Switch
- Full Wiring Kit With Fuse
